MS PIPE & FITTING

ERW steel pipe is formed by rolling strip and welding the seam, with tighter dimensional tolerances and less weight. The weld seam is heat-treated after welding that no untempered martensite remains, and the weld flash can be removed from both inner and outer surfaces.

ASTM A53 ERW steel pipe is a typical carbon steel pipe. It is largely used to convey fluids at low / medium pressures such as oil, gas, steam, water, air and also for mechanical applications.

TPMC supplies ASTM A53 ERW steel pipe in UL listed/ FM approved.

 ASTM A53 ERW steel pipe


  • Certificate: UL Listed/ FM Approved
  • Standard: ASTM A53, Type E, Grade B
  • Dimension: Sch10/ Sch40 as ASME B36.10M
  • Application: Fire main pipe, fire pump pipe, fire standpipe, fire sprinkler branch pipe
  • Model: P01

Seamless steel pipe (SMLS) is formed by drawing a solid billet over a piercing rod to create the hollow shell, without welding or seam. It is suitable for bending and cutting. The advantage of seamless steel is the ability of withstanding higher pressure.

ASTM A53 specification also covers seamless steel pipe. The pipe is intended for pressure and mechanical applications and is also acceptable for ordinary uses in oil, gas, steam, water and air lines. It is suitable for welding, bending and flanging.

TPMC supplies ASTM A53 seamless steel pipe in UL listed.

 ASTM A53 seamless steel pipe


  • Certificate: UL Listed
  • Standard: ASTM A53, Type S, Grade B
  • Dimension: Sch40/ Sch80 as ASME B36.10M
  • Application: Fire main pipe, fire pump pipe, fire standpipe, fire sprinkler branch pipe
  • Model: P07

GROOVED FITTINGS


Grooved fittings are used for connecting Standpipe to control, distribute, or support pipeline in different sizes or directions. By groove connection, project time is saved a lot with fast installation and easy maintenance. TPMC supply grooved pipe fittings for fire fighting system.

Grooved fittings

TPMC provides grooved fitting in UL listed/ FM approved:

› Grooved elbow
› Grooved cross
› Grooved cap

 Grooved 90° elbow


  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Type: Short radius, R=1.0D
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
  • Ref. No.: G01

 Grooved 45° elbow


  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Type: Short radius, R=1.0D
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
  • Ref. No.: G02

 Grooved 22.5° elbow


  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
  • Ref. No.: G03

 Grooved straight tee (Equal tee)


  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
  • Ref. No.: G04

 Grooved reducing tee


  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
  • Ref. No.: G05

 Grooved reducing tee with threaded branch


  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Branch: Female thread, NPT/ BSPT
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
  • Ref. No.: G06

 Grooved straight cross (Equal cross)


  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
  • Ref. No.: G07

 Grooved reducing cross


  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
  • Ref. No.: G08

 Grooved reducing cross with threaded branch


  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Branch: Female thread, NPT / BSPT
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
  • Ref. No.: G09

 Grooved concentric reducer


  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
  • Ref. No.: G10

 Grooved concentric reducer with threaded run


  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Minor run: Female thread, NPT/ BSPT
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
  • Ref. No.: G11

 Grooved eccentric reducer


  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
  • Ref. No.: G12

 Grooved end cap


  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
  • Ref.No.: G13

 Grooved drain cap with concentric hole


  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Centre hole: Female thread, NPT/ BSPT
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
  • Ref.No.: G14